Troubleshooting – How to Reactivate a Dormant GPS Tracker Battery

GPS-Tracker-Trouble-Shooting

When using a GPS tracker watch, GPS pendant for people, or pet GPS tracker, you may occasionally encounter a problem: the tracker won’t turn on and cannot be charged. This issue is usually caused by leaving the GPS tracking device unused and uncharged for a long time.

Why Does the GPS Tracker Battery Enter Sleep Mode?

Like most electronic devices, GPS tracker batteries naturally discharge when not in use. If the battery drains too much, it will enter self-protection mode to prevent permanent damage from over-discharge.

To avoid this, we recommend users:

  • Charge the GPS tracker regularly, even if it is not being used daily.

  • Keep the device active to maintain a healthy battery cycle.

By following these simple GPS tracker usage tips, you can significantly extend the battery lifespan and avoid common GPS tracker problems.

How to Reactivate a Dormant GPS Tracker Battery

If your GPS tracker seems completely unresponsive, don’t worry—there is a simple way to bring the battery back to life. Our ReachFar technical service team has prepared a step-by-step GPS tracker troubleshooting guide. You can also watch the video demonstration here:

Tools You Need

  • A 5V/1A or 5V/2A USB-A charger (a regular smartphone charger works).

  • The magnetic charging cable designed for your GPS tracker.

  • A reset pin (a SIM card pin).

  • Your GPS tracker device.

Step-by-Step Troubleshooting

  • Connect the charger to power, attach the magnetic charging cable, and plug it into the tracker.

    • If the tracker shows no charging light, don’t panic—it may still be charging in the background.

    • To confirm the charger works, you can test with another charger or cable. For advanced users, a USB voltage/current tester can be used (optional).

  • First Attempt: Keep the tracker connected for 3 minutes. Check if the charging light starts blinking or if the device powers on automatically (for models with auto-start).

  • If No Response: Disconnect the charging cable, press the reset hole shortly with the reset pin, then immediately reconnect the charger. Charge for another 3 minutes.

  • Repeat if Needed: If the tracker still doesn’t respond, repeat the process. Usually, within 5 attempts, the GPS tracker battery will be reactivated.

  • Once you hear the tracker’s startup sound or see the LED light flashing, congratulations—the dormant battery has been successfully reactivated.

Important Safety Notes

  • Be careful when handling power outlets to avoid electric shock.

  • The reset hole must be pressed briefly; a long press could cause a short circuit and permanent damage to the GPS tracker.

Expert Tips for GPS Tracker Battery Care

  • Always recharge your GPS tracker when you receive a low battery alert.

  • For best results, charge the battery to at least 80% each time.

  • Regular charging and proper use will maximize the GPS tracker battery life and ensure reliable performance.

By following this troubleshooting guide, you can easily fix GPS tracker charging problems and reactivate a dormant GPS tracker battery without sending the device for repair. These GPS tracker tips not only save time and money but also help extend the overall lifespan of your tracking device.

SHARE THIS ARTICLE: