A Finland customer bought a 4G LTE GPS tracker for his family. And then he kept feeding back that the tracking historical route was incomplete.
After obtaining the customer’s permission, I entered the personal GPS tracker ID number to view and analyze. I found this user had filtered out WIFI and LBS positioning. So, I think it’s necessary to make an explanation on some principles of GPS tracker positioning.
GPS, Beidou, and Glonass positioning are mainly available outdoors in open sky. A GPS tracker for person or pet, with independent battery power, is portable to move both outdoors and indoors, while it may could not get GPS signal in a building, under a tree, etc. At that moment, the GPS tracker will turn to LBS or WiFi for tracking. Therefore, we don’t suggest to filter LBS or WiFi positioning.
As we all know, there are three main types of positioning data sources for civilian GPS trackers: satellite positioning data, base station positioning data and WiFi positioning data. Only satellite positioning data is the way directly offering location in latitude and longitude.
When searching and aquiring satellite signal for positioning, a GPS tracker consumes most battery power. So, if the satellite connection fails during a setting period, normally 60 seconds, the GPS tracker is programmed to stop searching for satellites and report nearby base stations and WiFi hotpots as positioning references. Then, through professional data service companies such as Google or Amap, those base station or WiFi hotpots data will be parsed into latitude and longitude and displayed on the mobile tracking APP or Web tracking system.
In fact, in sparsely populated areas, cell phone base stations are far apart. In particular, 4G LTE base stations are newly built, and the base station code is often changed. When data companies such as Google and Amap don’t update all the base station data and WiFi data, it will lead to the result that some base station or WiFi hotpots data cannot be resolved to latitude and longitude normally. This is an important reason for some GPS tracker historical data loss and inaccurate positioning.
Finally, I’d like to repeatedly emphasize that most of the internal room of a mini GPS tracker is occupied by the battery, especially for pet GPS tracker and personal GPS trackers. For these devices, 2/3 of the space is occupied by the battery, so while designing these types of trackers, we need to consider the device portability, longest battery life, and accurate positioning – it’s actually a process of balancing thus some trade-offs must be made, impossible to maximize all these three aspects based on current battery technology.
Therefore, we need to choose the size of the battery according to the standby time and the appearance of the product, and then optimize the power consumption of the tracker through software solution. The most general software optimization is to switch the positioning way from GNSS positioning to LBS or WiFi when Satellite signal is poor, so as to reduce the power consumption. In this way, it’s feasible to ensure a minimum sized GPS tracker with at least two days of standby time.
In addition, it helps to know that civilian GPS trackers could not always provide complete accurate positioning. On the other hand, although it doesn’t provide the most accurate location, it does narrow the scope of aimless searching to a radius of 100 meters or even 10 meters. When it was used to search for people and things, this convenience is of great significance – it wins precious time to find the target.
Indeed, we hope that each user could understand more about GPS tracker technology and characteristics, thus use a device correctly and enjoy peace of mind.

